HOME | ABOUT | CONTACT US

COMMERCIAL SCRAP CHOPPERS

MODEL 513
“A Reliable Scrap Chopper for Metal Banding, Tubing, Extrusions, Plastic Strap and Lightweight Cable”

The Model 513 has been redesigned to be a reliable performer for metal banding, tubing, extrusions, plastic strap, and light-weight cable. Prepared for abusive environments, this unit has a strong 1/2” plate housing. The Model 513 has a magnetic starter to protect workers from an unexpected restart after loss of power. The air activated feedworks is controlled with a foot switch for operator safety.

HOW IT WORKS
Just introduce the material (banding) into the infeed funnel. The feedworks (pinch rolls) will then grab the material and pull it into rotating knife path. The feedworks will continue to pull at a rate of 90 feet per minute until the material is consumed or the operator releases the feedworks via the air-activated feedworks via the foot switch.

MATERIAL REFERENCE
The following are materials commonly processed: 3/8” x .125” steel band, 1/2” x .093” steel band, 3/4” x .093” steel band, 1” x .078” steel band, 1 1/4” x .046” steel band and high-tensile bale wire.

Standard product features:

  • Air-actuated feedworks—controlled via foot switch
  •  Infeed funnel with “Anti-Kickback” flap
  •  Knives can be rotated 4 times for extended life
  •  Full one year warranty and built in the USA

Standard electrical options:

  •  1-Phase – 230 volt – 60Hz – 12 amps
  •  3-Phase – 230 volt – 60Hz – 6.8 amps
  •  3-Phase – 460 volt – 60Hz – 3.4 amps

Dimensional Data:

  •  Infeed Opening – 5 5/8” x 1 5/8”
  •  Overall – 48” x 29” x 23”
  •  Weight – 997 lbs.

PRODUCT SPECIFICATIONS

2 HP Electric Motor Power 90 FPM Infeed Speed
3” Cut Length Number of Stationary Knives – 1
Number of Rotating Knives – 1
Top