STATIONARY COMPACTORS
MODEL C2
PERFORMANCE SPECIFICATIONS
MFG Rating: 2 cu/yd | Ram Face: 30″ x 60″ |
Ram Penetration: 11 inches | Motor: 10 HP |
Pump: 10.5 gpm | Average Cycle Time: 65 seconds |
Approximate Shipping Weight: 5500 lbs. | Discharge Opening: 38.5″ x 60″ |
FEATURES
Heavy Duty Structural Steel Construction
- All Welds Meet AWS Certification
- UL Listed Components
- 100% ETL & CETL approved
- Fully Jig & Fixtured Heavy Duty Structural Steel Design
- 3-D SolidWorks Finite Element Analysis (FEA) Stress Analysis Engineered Units
- Factory Tested & Inspected (Quality Assurance Mgr.)
- High Force HD Model Stationary Compactor
- Energy efficient kilowatt reduction
- Highest Platen Forces
- Easy Clean Out Removable Covers
- Nema4 Controls
- Rear or Side Feed Chute Installations
- Doghouse & Chutes Constructed by BACE
- Heavy Duty Load Binders
- Submersible Power units
- Eliminates need for a Oil Heater
HOPPER OPTIONS
Walk on Deck (700 lbs.) w/Rails, 3-Sided Hopper, Safety Gate & Interlock
- Drive on Deck (8,000 lbs.) w/Rails, 3-Sided Hopper, Safety Gate & Interlock
- Full Enclosure – Walk On w/Hopper, Gate & Switch 5 x 8
- Full Enclosure – Drive On w/Hopper, Gate & Switch 5 x 8
- Dock Feed Doghouse w/2 Plastic Cellar Doors & Switches
- Dock Feed Top Lid w/Air Shocks Rear Feed to Back of Compactor
- Full Enclosure – Walk On w/Hopper, Gate & Switch 8′ x 10′
- Top Feed Hopper with Hinged Lid
- 3 Sided “Side Feed” Hopper
- Security Door Assembled with Inside & Outside Frames
- Doghouse w/1 Side Door (LH or RH) with Interlock
- Doghouse w/Rear Doors & Interlock Switch
- Through the Wall – (Side Feed Chute Material, 4-Sided Blank Doghouse for Chute, Rear Feed Chute Material, Security Door Assembled with Inside & Outside Frames, Thru the Wall Kit, Extra Side feed door with Switch)